Ask Experts Questions for FREE Help !
Ask
    nhoegger's Avatar
    nhoegger Posts: 1, Reputation: 1
    New Member
     
    #1

    May 10, 2010, 10:34 AM
    Remove blade clutch 14sb john deere
    John Deere 14SB Mower
    I am trying to remove the Blade clutch. I have removed the first half of it but there is what looks like a big washer holding the rest of it onto the shaft. How do I remove this?

    Nathan
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    May 16, 2010, 08:23 AM

    Some of these are threaded you can run a large bolt in the center and push them off.
    If not you will have to remove engine and take it and have it pressed off,
    I always tapped out the ones that weren't threaded then backed them out,if you have access to large taps you could do this.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #3

    May 17, 2010, 08:06 PM

    Hi,
    12mm x 1.25 pitch bolt in center
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John deere 14SB belt replacement [ 3 Answers ]

The drive belt on my jd 14sb mower broke and from what I've read in other threads, it seems I need to pull the engine to replace belt. If so, any (or all) "how to" help and pitfalls to look out for would be appreciated. Thanks

John deere 210 blade belt routing [ 1 Answers ]

Can someone get me a diagram for the blade belt routing

Drive belt on a John Deere lawnmower 14SB [ 1 Answers ]

Can anyone tell me how to change the drive belt for this lawnmower? It would be greratly apprciated.

John Deere 160 blade clutch [ 5 Answers ]

My John Deere 160 mower blades do not engage when I flip the switch. There is power to the blade clutch so the switch is good. Can the clutch be rebuilt? Also does anyone have parts diagram they can scan?


View more questions Search