 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
White-Rodgers wiring
Hi all. I am attempting to replace a manual W-R thermostat model 1F58-72 with a programmable W-R model 1F82-261. I think I have all the wiring doped out except for one. The 1F58 has a blue wire on terminal X1. I don't find a comparable terminal on the 1F82. This wire seems to go the stage 1 heat and cool anticipator. I don't see anything on the 1F82 diagram indicating an anticipator. The only thing left on the 1F82 is a connection at terminal C which is common. Any suggestions are appreciated.
|
||||
Check out some similar questions!
I have a Rheem heat pump unit. A White-Rodgers 1F80-51 thermostat was connected up with the A/C cooling cycle working, but for heat, only the strip elements in the air handler come on. The thermostat is wired; white to W, red to RH w/jumper to RC, blue to B, nothing to O, yellow to Y, green to...
Need help wiring the White-Rodgers thermostats the Lennox Heating and Air Condiontiong that has 5 colour cables, B/W/R/O/G. I have the white-rodgers thermostats installed, the Furnace heating and Fan work as expected, but when switch to A/C, nothing happens, heard two click after switching to...
I have 2 wire (red & White) heat only system. It is steam heat run by gas. Currently I have Honeywell thermostat which uses 3 AA batteries. Thermostat has R, RC, O, W, Y, G terminals. R and RC terminals are connected by a jumper cable. I have Red wire connected to terminal R and white wire...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
