 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hunter Thermostat
I have done one of these before with no problems
Now I am trying again in a different house much older and I can't get it to work I have 2 bundles of wire coming out of wall 1st bundle a white and red only white was used on old thermostat 2nd bundle the normal white, red, yellow, green and a blue My first mistake was I didn't cut power when removing old and I did get a spark. I checked breaker and wasn't triped but I rest it anyway I hooked up as shown in manual execpt for blue because I didn't know where that one went. I am getting nothing no fan or anything. I hooked up red to red, why to yellow, g to green and w to white but did not hook up bundle 1 Any help would be great Thanks Bernie [email protected] |
||||
Check out some similar questions!
WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...
I have a Lennox T90H110A137 Thermostat with the following terminal letters and wire colors: G - blue wire F - red wire C - green wire H - yellow wire V - white wire I want to connect it to a Hunter 44665 Thermostat which has the following terminal letters: Y1 RH
I'm trying to wire a hunter 42999b to 1977 ge heat pump. Need to know what wires go where there are more wires on old one then what connects to new one!
Can anyone tell what wires go where? I've got red, blue, green, white, black, orange, brown and yellow. And the hunter thermostat has g, w/b, y/o, rc, rc1, rh, and y1.
What is the reset hole just to the left of the filter reset on hunter model 42995b for ? Have misplaced instructions. Thanks for any help
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
