Ask Experts Questions for FREE Help !
Ask
    shirley martin's Avatar
    shirley martin Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 3, 2010, 07:45 PM
    Bolens weedeaterBL 100, 31cc
    Started my trimmer and it ran so fast, it threw the motor off the shaft. Got it back together, but it still runs too fast. Any suggestions?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    May 4, 2010, 06:29 AM

    Hi,
    Either the cylinder is loose from the block or the airbox is loose from the block. Those are the two most common. It is an air leak nonetheless. It will "trash" the piston and rings given the chance.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What size wire for 220v 100 amp service at 100 feet [ 7 Answers ]

I am running 220v 100 ft to a 125 amp sub panel. A welder would be the heaviest thing used. (around 200 amp welder) what size copper wire would I need running in pvc underground

Mtd bolens 15.5 gas [ 0 Answers ]

Bolens 15.5 will run on ether but won't run on gas, draied tank and filled with new gas and still has same problem... any help is welcome, and thanks in advance

You must buy 100 items with $100 [ 1 Answers ]

You must buy 100 items with $100 with $1 you can buy 20 pans with $5 you can buy 1 spoon and with $1 you can buy 1 lid you must buy all three items

View more questions Search