 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
OK had a good look at coil and found a tang that obviously was meant to have a wire, so I solded one on. My understanding is that when this wire grounds it will kill the motor, so it should go to a switch and then to ground. Other mtd's seem to ground it first and then off to other safety...
Friend gave me a 94 bolens mtd with 12.5hp briggs. He obviously had key problems and removed the ignition (bypassing most of wiring loom) and ran a push switch for starting between small wire from solenoid and battery. The coil is new and has no wires to it, how can I make a kill switch without at...
What can be done about the lawnmower jumping forward when you take your foot off the brake?
I have a Bolens Riding Mower model 2136. It would not shut off, and I had to pull a spark plug wire to get it to shut off. I took out the key while it was still running, and now I can't get the key to fit back in. Any suggestions as to: 1) Why it wouldn't shut off; 2) Why the key won't...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
