Ask Experts Questions for FREE Help !
Ask
    justagurl's Avatar
    justagurl Posts: 1, Reputation: 1
    New Member
     
    #1

    May 3, 2010, 07:29 PM
    How to replace ring gear on the flywheel of a 1991 honda civic
    My 91 honda civic dx died when I was driving. It never started again. The starter tested good. How ever it is not turning the motor. I was told it could a bad flywheel?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    May 3, 2010, 07:49 PM

    It's unlikely that the ring gear is bad. See if this link helps:

    https://www.askmehelpdesk.com/cars-t...tml#post235560

    Ensure the clutch pedal is depressed, when you try to start the engine.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1991 honda civic [ 0 Answers ]

What came in a 1991 honda civic hatchback cx hatchback for a engine ? Mine has D16A6 and 1.5 intake dual point fuel injection with the transmission is a L3 5 speed .

How to replace a distributor o-ring seal(iirc)on a 93 civic 1.5L [ 1 Answers ]

Aloha! I need to know how to replace a distributor o-ring seal (iirc) on my 93' civic, it has a 1.5L. Is it a simple procedure? Any do's and dont's that I need to know about?

Honda civic 1991 [ 1 Answers ]

Hey how are you doing I have honda civic 1991 1.5L and I want to know it's hp ?

1991 Honda Civic [ 6 Answers ]

Dear Ask Me Crew:( I was driving down the highway at about 65 mph. and the car just lost acceleration. I had the car towed home. No more than a year ago I had a new timing belt put in. I checked the head with the valve cover off and all the valves were straight on the 1500CC engine. I...

1991 honda civic dx [ 1 Answers ]

thank you for the replies to my previous question. I do intend to change the trany fluid n filter. There's sum minor things that need to be done like new plugs n wires. I've noticed a small missfire in a cylinder but no biggie. I've tried searchin the net but haven't had good luck finding what the...


View more questions Search