Ask Experts Questions for FREE Help !
Ask
    tomd86's Avatar
    tomd86 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 28, 2010, 05:09 AM
    Briggs and stratton 10A902 pull start pawl ratchet
    I have a 4hp Briggs & Stratton push mower model 10A902, and the starter housing came loose, which caused the starter gear to disengage. When I looked inside I see a starter gear which looks like a tiny "bunt cake" pan, and sitting inside where two small white plastic pieces (I latter found out they are the pawl ratchets. What I have not been able to find, is how to put this back together (if in fact I can do that). The small white pawl ratchets are supposed to make contact with the starter gear and turn the rotor when the starter rope is pulled, but without the pieces in their correct position, when the starter rope is pulled, it doesn't engage anything so I can't start the mower.

    I have tried looking on the web and Youtube etc. but have not been able to find anything other than a printed parts manual. I would appreciate any help.

    Tom
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 28, 2010, 02:10 PM

    Hi,
    A picture is here:
    - list# - PartsAndService - View Illustrated Parts Catalogues - ipl.cgi.v305 1 -
    And a manual is here:
    http://www.mymowerparts.com/pdf/Brig...20STRATTON.pdf
    And check page 199.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I can't pull the starter cord on my 10hp Briggs and Stratton Engine [ 6 Answers ]

I recently purchased a two year old 10 hp Troy Built wood chipper. I've used it for about 4-5 hours and recently had to add a little oil. I added the correct type as per the manufacturers instructions. It started up just fine and after 15 minutes or so I shut it off to empty the bag. Once the...

Briggs & stratton leaks gas when you pull to start [ 2 Answers ]

My briggs & stratton lawn mower leaks gas through the filter area. When u pull the cord and when u turn the blade manually.

Pull cord on Briggs and Stratton [ 6 Answers ]

I have a Briggs & Stratton 5 hp 206cc magnatron. The cord was pulled out of place so I took it apart and it appeared to recoil just fine until I bolted it back onto the machine. Then... the cord did not go back in. Is there some way I can get the spring to rewind? :confused:

Briggs&Stratton Billy Goat Pull Start broken [ 3 Answers ]

Hey, my billy goat pull start is stuffed. When I pull it it goes floppy and won't wind back onto the wheel. Its happened before but when I've taken the top plate off it wound back on and I hadn't had trouble with it, until now. Is there anything I can do ?:confused:

View more questions Search