No power to electrical plugs on a dewalt geneartor model DG6300B

floyd02 Posts: 1, Reputation: 1

New Member

Apr 27, 2010, 07:41 AM

No power to electrical plugs on a dewalt geneartor model DG6300B

Engine runs fine but have no power coming from any plugs?

ballengerb1 Posts: 27,378, Reputation: 2280

Home Repair & Remodeling Expert

Apr 27, 2010, 09:08 AM

Try resetting the breaker on the side panel

Add your answer here.

Check out some similar questions!

B&S 16.5 (older model: 42a707) won't turn over w/plugs in [ 3 Answers ]

I've searched and searched to find the following suggestions: 1. Adjust the valves (twin cyl, no ohv, not sure this engine has valve adjustments) 2. ACR broken (still trying to figure out if this has ACR or not) Note: According the B&S IPL for this engine, there is no visible adjustment for...

Electrical partial-power-loss power to the outlet on one side and the ground [ 2 Answers ]

I have partial-power-loss as a result of a heater and christmas tree plugged in the same line in my home. The problem I 'm having is that each outlet that was affected still has 115V on ether side and ground , is this the result of a hot attaching itself to ground somewhere in my wall? And how...

Electrical plugs [ 1 Answers ]

Why do electrical plugs have holes drilled in the prongs?

Exterior electrical plugs [ 2 Answers ]

What is the easiest most efficient way to install exterior electrical plugs on a residential home?

Plugs stuck in electrical outlet [ 2 Answers ]

Help! My 2-pronged vacuum won't come out of the electrical outlet. It's stuck. I've pluged it into the same outlet before and had no problems. Any suggestions on how to get it unplugged? Thanks!