Ask Experts Questions for FREE Help !
Ask
    bashar_20044's Avatar
    bashar_20044 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 24, 2010, 02:24 PM
    Swimming pool mechanical calculation
    Mechanical calculation design for swimming pool

Check out some similar questions!

Static electricity in swimming pool during a storm [ 1 Answers ]

The pool is closed for winter,a severe storm hit. The wind was blowing and the cover started to lift. There is no electric on or around the pool.There was loud popping and flashes of light under the cover.This occurred at the deep end.Never in my life have we experienced anything like this.What...

How to wire a mechanical pool timer [ 5 Answers ]

I have a T104R mechanical pool timer. The wires coming from the circuit breaker switch are red,black& white. Where do each of these wires go? Your help would be greatly appreciated.

Present pool screening does not pass enough sunlight to heat the pool [ 2 Answers ]

I have an in ground pool with a screen enclosure. It seems that the present charcoal colored screen material shades the pool to the extent that there is not enough heating of the water to comfortably use the pool even during the month of August. Is there any screen material which will pass a...

After cement patch, can I paint inground pool walls and not use a pool liner [ 1 Answers ]

Existing pool liner has come off (bought home with pool as is) cement patches needed. I want to just paint the cement and fill the pool. Is that doable, or do I need the pool liner.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.