Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
220 Volt Pool Timer
[ 3 Answers ]
I am trying to install an Intermatic Swimming Pool Mechanical Timer 220V - T104P3 to my exciting pump. I have two live wires coming from the breaker box which I labeled Line 1 & Line 2, there is also a ground wire. Then I have to wires coming from the pump which I labeled Load 1 & Load 2. I have...
How should I set the timer for my pool filter?
[ 4 Answers ]
I have a rectangular above ground pool 16 by 24 feet by 4 feet deep. I live in New Hampshire. I have the ability to set the timer for the sand filter to go on and off twice a day. What time would be best to set it for, and for how many total hours per day should the sand filter run?
Hooking -up a pool pump from a new timer when wires are not right
[ 1 Answers ]
I honestly thought this was going to be a slam dunk and now I'm ridiculed amongst my peers. The wires coming from a pipe that is cemented in the ground are not your normal black white ground. There are 2 black and a green. Coming from the pump there are 2 red and 1 gray . The timer has indicated...
Timer For Aboveground Pool Pump
[ 5 Answers ]
Hi! I am a pool novice. I have a frameset aboveground pool with a cheesy pump - 1/16 HP, 120V. It's plugged into a heavy duty garage outlet, but it's not clear if it's a GFCI. What kind of pump timer can I use that is safe and inexpensive, possibly GFCI? Thanks! View more questions Search
|