Ask Experts Questions for FREE Help !
Ask
    CheezyRider's Avatar
    CheezyRider Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 24, 2010, 12:08 PM
    Whirlpool washer balancing after pump replacement
    I just replaced the waterpump on a Whirlpool top load washer. Guessin' it's seven or eight years old. The pump's white plastic and it's the one with the rubber check valve on the outlet.
    Turned it on it's left side (as looking at the front) to do the work. I know, I should have removed the cabinet, didn't know it at the time.
    Everything went together pretty easily. Hooked it up and now when it spins, it thumps and bumps like it's out of balance. Wife says the tub's positioned different than before.
    I re leveled it after the pump with a level. Wife checked the clothes and they weren't all on one side.
    I just pulled it out again, thinkin' a spring mighta popped off, removed the cabinet. Springs're all hooked up.
    Whatever it is, it probably has to do with me turning it on it's side.
    Got any ideas?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Apr 24, 2010, 12:22 PM

    I still think you popped a spring. Model? Look up on www.searspartsdirect.com
    CheezyRider's Avatar
    CheezyRider Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 25, 2010, 08:53 AM

    Every one of 'em is hooked up. None broke and no parts layin' on the floor...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Gold Washer water will not pump out [ 0 Answers ]

Agitator spins and go through the cycle, but leaves water in the bottom of drum. I removed discharge hose and found not obstruction. I removed the agitator and found not blockage in the bottom of drum. Where do I look next? Thanks, Bill

Whirlpool washer drain hose replacement [ 1 Answers ]

How do I replace the drain hose on my Whirlpool top-load washer?

Whirlpool tub balancing spring [ 1 Answers ]

The tub balancing spring on my Whirlpool top loading washer model# LSQ9645KQ1 rusted through at the end of the long straight wire. I have bought another spring and need to know where the spring connects on the washer base.

View more questions Search