Ask Experts Questions for FREE Help !
Ask
    clusterhead's Avatar
    clusterhead Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2007, 11:27 AM
    MTD Lawn Tractor
    I am trying to remove the steering shaft 'y from my tractor but I am having a hard time loosening the hex bolt from underneath. I am using a Hex wrench and it's just to tight to come off. Any suggestions would be helpful.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Oct 21, 2007, 06:21 AM
    Apply pb blaster, and use a impact wrench.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

MTD Lawn Tractor [ 8 Answers ]

Greetings, I have a 1991 MTD lawn tractor 18hp w/46" deck, 6 speed, low and high range. Over the past year 1st through 4th won't move tractor forward and I have to use position 5 or 6. Is this a problem with the trans or a drive belt problem? The only belts that have ever been changed are the deck...

Mtd lawn tractor [ 6 Answers ]

I recently bought a used mtd lawn tractor, 38" deck, 7 speed manual ,12 hp I/c briggs engine. The tractor needs a new transmission belt. Because I don't have an owners manual or parts list, I don't know which belt to order. Does anyone know what belt I need?

MTD 46" Lawn Tractor [ 2 Answers ]

I removed the left side belt guard on the deck, it had a spring attached to one corner. I am trying to reinstall but I am not sure what the other end of the spring attaches to. My manual does not show it.

Mtd lawn tractor [ 3 Answers ]

Have lawn tractor with briggs. Only get a click when trying to start. Replaced battery, same result.

Mtd lawn tractor [ 3 Answers ]

I have an MTD lawn tractor seems to act like it is sliping if forward gear I have repaced the belt. Does not do this in reverse. Could it be the transmission is that rebuildable?

View more questions Search