Ask Experts Questions for FREE Help !
Ask
    Roger57's Avatar
    Roger57 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 11, 2010, 01:17 PM
    infinity control check stactic pressure
    Just installed Carrier Infinity 19 Seer with variable speed air handler 5 ton. Contractor said static pressure is .44. How do I check static pressure with the infinity thermostat and is .44 a good static pressure for this unit?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Apr 11, 2010, 01:51 PM

    The Infinity control won't let the SP get out of hand. It will reduce the speed of the motor thus lowering the static pressure.

    It's really not the unit, it's the system. Primarily the ductwork.

    At 1PM every day the system will turn on the fan at high speed for about 5 minutes. It's checking the change in static pressure since the air filter replacement indicator has been reset.

    Set the fan speed to high and push ADVANCED until a menu appears (about 30 sec). One of the functions reads static pressure/CFM etc.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Summation from -infinity to infinity [ 6 Answers ]

how do u find the value of 'sigma' from n=-infinity to infinity for (1/2)^(2 mod n).. sorry wasn't able to put it in the right format..

Buy Infinity control thermostadt? [ 3 Answers ]

Ned to replace furnace. Have bids from both Bryant and Carrier, which I have been told are identical. Bryant bid provides new honeywell thermostadt. Carrier says they will put in the Infinity control with their bid. Bryant bid is about 200 bucks less. I'm looking at the plus 90 3 stage furnace ...

Bryant Evolution (carrier infinity) Control and Honeywell Fresh Air Vent. [ 2 Answers ]

I have an Bryant Evolution system installed. This is the same as a Carrier Infinity system. This consists of a 355MAV furnace, a 598B a/c And SYSTXBBUID01 Evolution control. Also installed in this system is a Honeywell Y8150 ventilator and a Honeywell HE440 steam humidifier. The...

How to check if water is in a Pressure Tank [ 1 Answers ]

How can I check to see if my pressure tank is getting any water? The entire system is just a little over a year old. The pump seems to run more then what it should. I have checked the pressure on the tank and it is set at 28 psi (30 - 50 psi switch). No water came out of the valve, so the tank...

Air pressure check (gas line) [ 2 Answers ]

How can I check the air pressure on a gas line to my house?

View more questions Search