Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Service panel location and or re-location codes
[ 8 Answers ]
I just built a new addition on my home, bigger than my existing home. I want to move the service panel from the old basement to the new basement, I would like to do this using the 4/0-4/0-4/0 aluminum service wire run in conduit, it is about 45 to 55 feet. What is the code on this? Also what is the...
Adding another panel from a 200 amp service panel
[ 3 Answers ]
Hi everyone, this is my first post. I have a 60 x 100 ft shop that has a 200 amp service fed in from the pole. Well I added a living space in the shop, which is about 720 sq ft. I plan on doing all the wiring myself and need a little advice on what kind of panel I should use? The living quarters...
Need to change panel box location in service upgrade because old one has only inches to I
[ 7 Answers ]
4 electricians gave estimates to upgrade a service box from 100 to 200 amps. Only one felt that the new panel should definitely be moved because the old one is smaller and sits up against the gas meter piping on one side and the corner of the garage on the other, leaving only inches around the...
200 AMP Service panel to 200Amp Sub Panel
[ 1 Answers ]
I getting new 200Amp service to surface mount service panel. I want to run 2oo cable to bring it sub panel in my Garage which is approx 120Ft Run through ceiling. 2 Questions 1. Is there any ristriction on running a 200AMP inside house to garage ? 2. I got a dirt cheap subpanel that has...
Location of upgraded service panel
[ 2 Answers ]
I am upgrading the electrical service from 100 to 200 amps and am in question of my new desired panel location. I would like to place it on an exterior wall behind the new meter location. The power company has said my new meter location is fine. I was wondering if it is code to have the panel... View more questions Search
|