Ask Experts Questions for FREE Help !
Ask
    bob winn's Avatar
    bob winn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 28, 2010, 06:07 AM
    The stack pulley assembly (#094139) Murray riding mower 30532x92A (1997)
    My '97 Murray riding mower needs the stack, pulley assembly (part #094139). It is wobbling badly, though engine is running fine. All my search online has revealed thiis part is "no longer available". Surely there is a replacement that will work?? My manual diagrams also do not show how to remove or replace this part. I rebuilt the entire deck last summer. Approaching 80 this summer I do not want to buy another mower... Thanks in advance, Bob
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Mar 30, 2010, 05:41 PM

    You might try replacing the bearings in the pulley.
    Luck
    milisj's Avatar
    milisj Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Apr 5, 2010, 01:02 PM
    It is held onto the engine shaft by a lockwasher, a washer, and a hex bolt
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #4

    Apr 5, 2010, 03:28 PM

    You looking for this? Engine Stack Pulley<br>Murray 690439Z, 690439 Z, 690439, 690448, 094139, 094139 Z, 690439 Z, 690439MA, MU690439, MU690439 Z
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Riding mower double pulley removal [ 10 Answers ]

I have a riding mower and I need to remove the double pulley that is on the engine shaft. I have already removed the bolt but the pulleys will not come off. Is there a special tool or technique I need to use?

1997 Murray riding mower drive belt [ 4 Answers ]

I have a 1997 17hp Murray riding mower with 42" cut. My drive belt has broken and I cannot read the part number. I was never given a manuel for this mower so I have no idea what to get. The model number is 42536x92A. If someone out there can help me I would certainly appreciate it a lot.

Riding mower blade is hitting the deflector assembly. [ 2 Answers ]

I have an issue with a blade for my Murray 16.5 '42 lawn tractor. Currently, the blade hits the deflector assembly whenever the mower is placed in engage. When I replaced the old blade, the new blade continued to hit the deflector assembly. I also adjusted the blade rotation control to no avail....

Craftsman rear engine riding mower drive belt pulley alignment [ 1 Answers ]

The drive belt that propels the machine keeps coming off the idler pulley. It appears that the idler pulley is positioned we below the other two pulleys. Is there a way to move the idler pulley up so it aligns with the others.

View more questions Search