![Ask Experts Questions for FREE Help !](custom/vgo/images/amhd_logo_os.png) |
|
|
![CircusFun's Avatar](/images/avatars/default_avatar.gif) |
New Member
|
|
Mar 20, 2010, 05:49 PM
|
|
Yard machines
What is the belt size for a 1999 Yardman with a 42" deck
|
|
![DG's Avatar](image.php?s=d17f7a391b8cceaef55af37ba2cffc6b&u=705802&dateline=1285212494) |
Ultra Member
|
|
Mar 20, 2010, 05:52 PM
|
|
Would need the model number to look up
|
|
![CircusFun's Avatar](/images/avatars/default_avatar.gif) |
New Member
|
|
Mar 20, 2010, 05:55 PM
|
|
What is the size of a deck drive belt for a 1999 YardMachine with a 42" deck
|
|
![CircusFun's Avatar](/images/avatars/default_avatar.gif) |
New Member
|
|
Mar 20, 2010, 05:56 PM
|
|
Sorry Model # 13ai608g
|
|
![CircusFun's Avatar](/images/avatars/default_avatar.gif) |
New Member
|
|
Mar 20, 2010, 05:59 PM
|
|
Sorry the model # is 13ai608g
|
|
![CircusFun's Avatar](/images/avatars/default_avatar.gif) |
New Member
|
|
Mar 20, 2010, 06:09 PM
|
|
Do I need to Submit the question again for an answer ?
|
|
![KISS's Avatar](image.php?s=d17f7a391b8cceaef55af37ba2cffc6b&u=189238&dateline=1216586538) |
Uber Member
|
|
Mar 20, 2010, 06:24 PM
|
|
No.
The Gates belt number can be found int his document. http://www.royalsupply.com/downloads/GatesLG-Guide.pdf
The generic part number can be found by looking up the belt spec on the Gates Website. Just print out a copy when you go get a belt. The smart ones can make a generic part number out of the spec.
|
|
![CircusFun's Avatar](/images/avatars/default_avatar.gif) |
New Member
|
|
Mar 20, 2010, 07:07 PM
|
|
I guess they are not smart because they gave us the wrong belt. I tried to find the length of the belt at the website you said to go to, and I found nothing on the length . Do you by chance know where I could find that info
|
|
![DG's Avatar](image.php?s=d17f7a391b8cceaef55af37ba2cffc6b&u=705802&dateline=1285212494) |
Ultra Member
|
|
Mar 20, 2010, 09:41 PM
|
|
If you have a single belt this is the part # 954-0485
If you wait until tomorrow I'll be going by my shop and I can look in the cross over book and give you the size.
|
|
![KISS's Avatar](image.php?s=d17f7a391b8cceaef55af37ba2cffc6b&u=189238&dateline=1216586538) |
Uber Member
|
|
Mar 20, 2010, 10:09 PM
|
|
If you go to the .pdf I referenced, and search for the model #, there are 4 possible belts. Type 25 in the page # at the bottom of the page. It spans two columns. Two belts at the bottom left and two on the top right.
What Gates p/n do you come up with?
|
|
![DG's Avatar](image.php?s=d17f7a391b8cceaef55af37ba2cffc6b&u=705802&dateline=1285212494) |
Ultra Member
|
|
Mar 21, 2010, 06:27 AM
|
|
According to the book,
For a 42" deck with a manual pto
the belt is 954-0485 its 5/8 " x 97".
Luck
|
|
![KISS's Avatar](image.php?s=d17f7a391b8cceaef55af37ba2cffc6b&u=189238&dateline=1216586538) |
Uber Member
|
|
Mar 21, 2010, 06:51 PM
|
|
That's not EXACTLY what I get with your info (manual PTO). I get a Gates 6575BR with your info, 21/32 with an inside length of 97.15"
It doesn't seem to cross to a standard belt number.
Usually you can go to a NAPA auto store with the Gates # and come back with the right belt.
|
|
![DG's Avatar](image.php?s=d17f7a391b8cceaef55af37ba2cffc6b&u=705802&dateline=1285212494) |
Ultra Member
|
|
Mar 21, 2010, 07:20 PM
|
|
This came out of the MTD book that's who makes this mower ,
But either one would work,because this has a spring loaded idler on it.21 /32 will not go as far into the pulley so it's a hair longer
|
|
![KISS's Avatar](image.php?s=d17f7a391b8cceaef55af37ba2cffc6b&u=189238&dateline=1216586538) |
Uber Member
|
|
Mar 21, 2010, 07:50 PM
|
|
Cool. Thanks for the OP's sake.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
MTD Yard Machines tractor won't start
[ 8 Answers ]
I have an MTD Yard Machines 20 h.p. Lawn tractor with the Briggs & Stratton I/C engine. The engine model # is 461707 and the type is 0143 E1. My son was cutting grass yesterday and said that the jerk and hesitate a little and then started making a clicking sound so he turned the blades off and then...
Yard machines 2800m
[ 1 Answers ]
When I start my gas trimmer it runs for about a minute then shuts itself off. What is the problem?
MTD Yard Machines belt drive
[ 6 Answers ]
How do you change the drive belt on a MTD Yard Machine lawn tractor? The old one was shredded so I do not have a reference.
MTD Yard Machines tractor will not start
[ 3 Answers ]
My MTD Yard Machines tractor with a 21hp motor and a 46in deck will not start. It had been working fine up until recently. However, since our last rain it has not started. I cover it with a large tarp to make sure the tractor does not get wet as I do not have a shed or garage to store it in.
...
Yard Machines 2800m string trimmer
[ 23 Answers ]
I have a brand new trimmer and when I get it started it will only run on half choke.When I put it on 3 which is the full run setting,it just dies out when I pull the gas lever.I have fresh gas and oil mix that is properly mixed.It will run fine on half choke but when I set it to full run it dies...
View more questions
Search
|