Heil furnace parts

handytom Posts: 2, Reputation: 1

New Member

Mar 8, 2010, 09:37 AM

Heil furnace parts

Need clean out plug top of oil furnace

handytom Posts: 2, Reputation: 1

New Member

Mar 8, 2010, 09:40 AM

Heil furnace parts clean out plug top of furnace

Need clean out plug top of oil furnace

Mar5jul Posts: 7, Reputation: 1

New Member

Mar 22, 2012, 06:20 PM

Where can I get parts for Heil furnace in Portland, or.

Add your answer here.

Check out some similar questions!

Heil furnace schematic and directions for parts install [ 11 Answers ]

Where can I find a good schematic or diagram of the parts within a Heil furnace? Also, when purchasing parts, do they come with installation directions? I always want to try the initial install myself rather than paying for service calls first.

Heil furace parts [ 2 Answers ]

Have a Heil furace in garage start up blower start glow plug starts burner come up to temp fan starts may run for 2 min to 5 min. shuts off before it get up what the themostat is set at it will keep doing this cycle.What could be something to check?

Heil furnace [ 0 Answers ]

Diagnostic code lo pressue switch open when should be closed on two stage. Only on first heat cycle/lo. Does it need new lo pressure switch? Or simpiliarfix?

Heil Furnace-Combustion fan comes on but furnace does not come on [ 12 Answers ]

I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...