Ask Experts Questions for FREE Help !
Ask
    bockenstedt's Avatar
    bockenstedt Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 15, 2009, 06:27 AM
    Heil furace parts
    Have a Heil furace in garage start up blower start glow plug starts burner come up to temp fan starts may run for 2 min to 5 min. shuts off before it get up what the themostat is set at it will keep doing this cycle.What could be something to check?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Dec 15, 2009, 03:19 PM
    Capicitor that goes to the blower fan would be the first thing,, they are cheap, get exactly same numbers like the one you have,, if this don`t help,, let us know
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #3

    Dec 15, 2009, 07:19 PM

    Clogged air filter? Something blocking air return or supply?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furace fan won't stop unless furnace is shut off [ 8 Answers ]

Hi, I have Heil Ultimate II gas furnace with about 13 yrs old. The furnace is working OK except the fan would never stop as long as the furnace is on, therefore, it will blow the cold air when the heating stops. I also tried to disconnect the wire from the board, and fan will still not stop. ...

Heil furnace schematic and directions for parts install [ 11 Answers ]

Where can I find a good schematic or diagram of the parts within a Heil furnace? Also, when purchasing parts, do they come with installation directions? I always want to try the initial install myself rather than paying for service calls first.

Intertherm Furace [ 4 Answers ]

I have an Intertherm furnace with electronic ignition. When it kicks on it only burns for a couple of seconds. I have changed the module, gas valve, igniter,checked the exaust flue, and thermostat... Whats up, I'm stumped. monkeypud:confused: :confused:


View more questions Search