Ask Experts Questions for FREE Help !
Ask
    roroth's Avatar
    roroth Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 6, 2010, 01:14 PM
    Can a razor only outlet be used for a night light
    Can a razor only outlet be used for a night light?
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Mar 6, 2010, 01:42 PM

    What country is this because I have never heard of razor only on an outlet? If you have standard voltage at the plug then you can put a nightlight there because it uses far less energy then a razor does. Also the LED ones work great and last a long time.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dashboard, taillight and parking light/night light [ 2 Answers ]

Honda Accord 94: My dashboard, taillight and parking light/night light are not coming on. I have changed the fuse what else could be wrong. Note that the headlight which is controlled by the same switch comes on.

Adding light switch and light from outlet [ 1 Answers ]

Would like to know how to wire have excisting outlet would like to come off this outlet and put light switch then light

Replace Vanity Light with Convenience Outlet with Light Only [ 2 Answers ]

I am replacing an older style vanity light in a guest bathroom. The old light has a convenience outlet built into the light fixture base. The new light has only a black, white and ground wire. The painters removed the old light so I do not know how it was connected. The wires coming from the...

Bath Room Razor Outlet to GFCI [ 4 Answers ]

Hi there, I recently moved into a house that has an outlet in the bathroom next to the sink but it is one of those Razor Only outlets (single 2 prong outlet no ground with a metal back plate) I was wondering if it is possible to change this outlet to a GFCI outlet for use for hair dryer é curling...

Bathroom light and outlet. [ 10 Answers ]

Recently purchased a new house. 2 bedroom ranch approx 900sqft. The house was constructed in 1955. The panel was replaced by the previous owner. (By a professional electrician) I was a professional Lowvoltage (DataComm) installer for quite some time, so I have experience fishing wires. ...

View more questions Search