 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton bay ceiling fan keeps going off
We have a remotely opperated Hampton Bay fan, and I have changed the battery, but not the "code" yet. I have had no problem controlling it with the remote for the fan or the 2 lights, but lately it only stays on for like half a minute and shuts off. (both for the lights and the fan).
Is there something else wrong with the unit? Will changing the codes solve the problem? -Dan |
||||
|
||||
|
Try changing the "codes" first. See: Ceiling fan remote controls - help and FAQ- Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
What part of the ceiling fan needs to be removed to get at the on/off chain housing?
Can you tell me how to remove my ceiling fan off the ceiling. I don't know how to get the cone-shaped piece that is touching the ceiling off. Thank you.
The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?
View more questions Search
|
