Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Smart valve not opening
[ 1 Answers ]
A haier 80k furnace with sv95,runs continually,with nogas valve trials,the controlboard does not show any fault codes.
Honeywell Smart Valve
[ 0 Answers ]
Ducane furnace with ST9160B control card : I have a Smart Valve (SV9520H) that seems to pass all tests and shows nothing is wrong (according to indicator flashes) Hot surface Ignitor glows, valve solanoid clicks to allow gas to come out but nothing comes. I disconnected Gas and tried to blow...
Honeywell Smart Valve failure
[ 2 Answers ]
I have a Tempstar furnace and what is happening is the furnace will call for heat and the draft inducer motor will come on and after a momont I will hear the pressure switch go and nothing happens. The electric glow rod does not glow and the furnace does not fire but here is the catch the first...
AC/Heating - smart valve
[ 16 Answers ]
We have a home (PA) that only had electric heat when we purchased 7 years ago. Added central air-conditioning. A year later added central propane heating. The heating system "died" a couple of weeks ago. The service company replaced the control board and said it worked. It did not, and they...
Smart valve
[ 2 Answers ]
Hello, I have two questions. I have a Tempstar gas furnace that has a intermittent smart valve issue. It sometimes goes days and works fine and others, it will not open the main gas line. I get an orange glow from the ignitor, but the gas never comes on and the cycle ends after a few tries.... View more questions Search
|