 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman furnace won't start
I have a Goodman furnace (GMT090-5B) that stopped working sometime during the night. The unit will not start at all, so I followed the instructions for resetting the pilot, checked breakers, power coming in, and status light on the circuit board. Everything is normal.
What should I check next? Thanks. |
||||
Check out some similar questions!
I have a Goodman furnace model # gun1004b that won't ignite. Evertime I tap on the selinoid it ignites properly. Would the gas valve be bad?
I have a 80% GMH8 goodman furnace that won't ignite. I can manually light it when the gas valve opens and it will run fine and shut off like normal. The glow plug ignitor doesn't come on but a couple of times I have saw it glow for a sec then go out way before the gas valve opens. The furnace was...
I have a 4 year old furnace. Igniter glows but will not ignite.then it shuts down. Then starts to recyle again. I have checked voltage at the gas valve and all limit switches. All read 25 volts except one. I was told by a hvac repairman to jump it to see if it is the problem. Jumping made no...
I recently had a GMH8 goodman furnace installed in the summer and after it was installed it fired right up, but now that I don't need the air and its time to use the furnace it won't ignite. It starts to cycle but when its time to ignite the burners it shuts back off and tries to ignite again. When...
I have a goodman furnace that goes like this. Inducer fan comes on, 10 secs later glow lights up, 10 secs later get blue flames 10 secs later blue flames goes out. Repeats 3 times I have replaced the flame sensor still same problem But here is the thing. I am only getting 10 volts to the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
