 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a Kenmore Elite Washer model 110.20972 992 that will not agitate or spin. It fills with water but in the wash or spin cycle it does nothing. I can turn it to the spin cycle to drain the water but the clothes are really wet and have not spun. From reading other answers I think it may have...
I have the same washer as SerTam (dated 4/2/06). Model #110.20052 992 The washer filled and the light said it was washing but it was just making a horrible buzzing sound. It was not agitating. I was able to get it to drain though. It also would stop draining if I raised the lid so I don't think...
Model number 11020072991 Ok, here's where I'm at. I believe it's the drive coupler? I've disconnected the control panel and fliped it back. I remove the brass colored springs holding on the cover and removed the cover after disconnecting the clamps and hoses needed. Now, I'm stuck and don't...
Agitator does not fully turn. Clothes are not being pulled down N
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
