Ask Experts Questions for FREE Help !
Ask
    wilsur's Avatar
    wilsur Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2010, 06:27 AM
    6 0 Powerstroke Problems
    2006 f250 6.0L won't start changed fuel filters and icp sensor still won't start
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Feb 26, 2010, 06:42 AM

    Perform tests in the basic diesel engine troubleshooting link:

    https://www.askmehelpdesk.com/cars-t...ml#post1415281
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Problems with 2007 6.0 powerstroke [ 4 Answers ]

I've just purchased a 2007 Ford F-250 powerstroke. All the forums I've been to, I can't find anything about 07 6.0 powerstrokes. Can anyone help me out with this. Can I expect problems, or has Ford fixed most of the bugs.

6.0 powerstroke problems [ 1 Answers ]

Isit common for the exhaust back pressure to go mine has gone though two in two years

6.0 powerstroke problems [ 1 Answers ]

I thought I purchased bad fuel, seemed to be collceting water but sensor never came on, truck would practically shut down, drain water and start back up and run fine, changed filters, dropped tank off and cleaned it. Still doesn't seem to have the power it did.

6.0 powerstroke problems [ 2 Answers ]

At idle and take off engine has a miss or very rough accelaration. What would you recommend? By the way the truck has 275k on it. Other than the miss it runs great

Powerstroke 7.3 problems [ 2 Answers ]

I took my 2002 Ford F 250 7.3 Diesel to the dealer for the recall of the cam sensor, maybe coincidence but twice now I have parked the truck on a slight slope nose down and after only 10 to 20 minutes it wouldn't start? The way I got it to start last time I removed the fuel filter. It started...

View more questions Search