 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Conecting 2 lights to a single and double switch
I have a single switch downstairs and doble on the landing the double runs the bathroom and landing the single downstairs does just landing thing is I tried to change double switch and can't remember where wires go any help I'm desperate
|
||||
Check out some similar questions!
I am looking for a diagram that will clearly show me how to wire 6 recessed lights on a single switch. Also wondering how to steal power from a 3 way switch for a plug.
I would like too know how too wire to lights of which were wire in series to one switch, and now I have bought a combination device so I can have each light go on separately. The two lights are wired up together and off one of the lights is a wire going to the switch. Also the switch has the wires...
I have three light canisters installed in a line. There is a motion sensor switch that services several other lights in this room. Please show me the precise white/black wiring requirements/schematic from this same switch in order to get these three new lights connected properly. Presently I...
I am planning to install 2 ceiling fans and 2 lights which will be operated from a single pole switch. The switch in question operated 1 light which has been replaced with a 2 light fixture. The ceiling fans will seldom be ran at the same time with the lights. Will this be too much for a single...
I recently added a flood light to the outside. I used 14/2 wire. I want to wire it to an existing light where the power source is and then to a stacked switch where I can turn off and on both lights. How do I do this?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
