Ask Experts Questions for FREE Help !
Ask
    frazierj1999's Avatar
    frazierj1999 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 25, 2010, 01:48 PM
    How do I drill a hole in a vitreous china toilet tank?
    I need to replace an old (circa 1914) toilet tank that has cracked. I can get a new tank that looks very similar and is the same size, but has no mounting holes in the back to mount to the wall. It is connected to the bowl with a 2" closet bend.
    If I could drill 2 holes in the back of the tank it would work.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Feb 25, 2010, 04:24 PM

    Use carbide tip drill bit. Do not push hard. Take your time.

    U may have to use spacers over screws so lid seats correctly.

    Good luck

    Chuck
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Feb 25, 2010, 04:42 PM
    Why not save yourself the hassle of drilling holes in china plus the risk of damaging the tank an simply purchase a hall hung tank? (see image) Regards, Tom
    Attached Images
     
    frazierj1999's Avatar
    frazierj1999 Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Feb 26, 2010, 07:58 AM

    I would love to, but where does one purchase such an item?
    frazierj1999's Avatar
    frazierj1999 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Feb 26, 2010, 08:00 AM
    Quote Originally Posted by creahands View Post
    Use carbide tip drill bit. Do not push hard. Take your time.

    U may have to use spacers over screws so lid seats correctly.

    Good luck

    Chuck
    Thanks Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you drill vitreous china? [ 6 Answers ]

Hi all, I'm thinking of adding a soap dispenser to my bathroom sink, a project which will involve drilling a new hole in the faucet deck to accommodate the new addition. All the plumbing books I've read warn me to use the proper drilling technique for whatever material the sink is made of. So I...

Drill a hole in my roof. [ 2 Answers ]

Going to drill a 2" hole in the roof (asphalt shingles over plywood) and run a vent for the drains. Help with making sure I have no leaks is what I need. I did roof my own garage so I know what to expect. How to remove shingles to place the pipe flange down and replace shingles?

Vitreous China Cistern [ 1 Answers ]

Hello, I want to know How to drill a hole on a Cistern that is made of Vistreous China without Cracking or chipping on its surface and what type of drill would I need to use, i.e wood or masonary. The reason for drilling such a hole, is to convert right hand flusher to a left hand one. Thank...

Drill hole toilet tank [ 2 Answers ]

Need to drill a hole in toilet tank to expand lever Need tips-drill bit, speed, etc

View more questions Search