Ask Experts Questions for FREE Help !
Ask
    kerty's Avatar
    kerty Posts: 10, Reputation: 1
    New Member
    		  
    #1

    Feb 24, 2010, 11:50 AM
    Carrier 8000 error 14/34 - problem: Inadequate flame carryover
    There are 5 burners. Between the two on the left there is an electric igniter, and between the right two there is the heat sensing element. My problem is that only the two burners on the left get lit, but the other three don't and this causes error codes 14, 34, since there is no flame at the sensor.
    This used to work fine after a couple of tries, but finally stopped working. I have to cut power to the furnace, and sometimes it works and sometimes it doesn't after that. If I slightly blow diagonally from the left to the right the flame propagates - meaning there is enough gas, because I'm not fanning the gas but the flame. I used a bottle cleaner brish to get rid of some spider webs and dust, but still same thing.
    I guess I should take out the burner assembly and give it a good cleaning?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 24, 2010, 02:09 PM
    Remove burners and clean burner flame jumper areas. Then check for the proper gas pressure with a manometer and adjust to the factory recommended setting.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier Weather Maker 8000 flame sensor [ 10 Answers ]

Hello, I have a Carrier weather maker 8000 and have received error 34. I would like to find the flame sensor so that I may clean it but don't know what it looks like. I have surfed the site and am unable to find it. Can anybody help with this. Thank you in advance, TripleT

Carrier Weathermaker 8000 keeps getting error 34 [ 8 Answers ]

I keep getting an error 34 when I try to start my weathermaker 8000, I think the problem is low inlet gas pressure because the gas comes on after the click. I gently fanned the gas towards the igniter and it worked. If I don't do this it cuts off after four tries with out igniting. Like a said,...

Carrier Weathermaker 8000 - Error Code 14 [ 3 Answers ]

I have a Carrier Weathermaker 8000, model # 58WAV111-16. At the end of the winter last year, it quit igniting at all (or so I thought), and I simply let it go until the past couple weeks. I replaced the ignitor, thinking it was the issue, with the following results. The unit will ignite...

Carrier Weathermaker 8000 Error Code 24 [ 1 Answers ]

I have a Carrier 8000 Weathermaker (model # 58WAV091-16) that is displying error code 24. Any idea what this is (24 SECONDARY VOLTAGE FUSE IS OPEN Check for: - Short circuit in secondary voltage (24V) wiring and how I can fix it?

Carrier 8000 Error Code 21 [ 9 Answers ]

Hello all, I have read through many post but can not find info on an error code 21. Any idea which direction I need to go with fixing this unit? Unit says 21 is a Gas Heating Lockout or Stuck gas valve relay. Does this mean I need to get a hammer and tap on that thing to unstick it? :D Any Help...

View more questions Search