 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Limit switch stays on for a few seconds then blinks back on
My furnace has been blinking inicating that there is an open limit switch. I shut the main breaker off for a few minutes and then turned it back on, now the light stays on while the fire is lit, once it is on " cooling " mode it starts blinking again, what else can I do?
|
||||
Check out some similar questions!
Tried replacing the pressure switch does not help, have a child and ill wife help
Have natural gas hot air furnace with honeywell smart valve SV9520H8067. Unit calls for heat and ignites OK but only stays lit for 5 seconds and goes out. Have had smart valve replaced 5 years ago. Does this sound like another smart valve problem?
My squareD 30-50 range pressure switch was turning on for 5 seconds, then off for 7 seconds. Over and over and over again. Sooty deposit under plastic cover. I replaced the switch with a SquareD 40-60. There was a bunch of sedimental crud coating the inside of the nipple, but there was air...
Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...
How do I fix this? 2 blinks - pressure switch is on... :confused:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
