Ask Experts Questions for FREE Help !
Ask
    Nordyne's Avatar
    Nordyne Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 23, 2010, 03:20 PM
    Nordyne dual supply
    I have a Nordyne Dual Supply 240 vac 4 speed 4 ton 2.9 FIA 1/3 HP. When heat is turned on system will click several times off and on before it finally comes on.
    Nordyne's Avatar
    Nordyne Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Feb 23, 2010, 03:24 PM

    Nordyne dual supply 240VAC. When heat is turend on system will click off and on severl times before it finally comes on.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #3

    Feb 23, 2010, 04:13 PM
    Just a guess... low gas pressure (charge)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Power supply issues Apple Power Mac G4 dual 1.25 MDD [ 4 Answers ]

I disconnected the power cord on a G4 MDD dual 1.25 to reset the firewire ports and now the unit will not power on. When I push the power button it flashes on for a sec and then nothing happens. I tried doing a SMU reset and a different power cord to no avail. I have had this unit for about 6-7...

Dual power supply [ 7 Answers ]

Need help building a dual power supply. Can anyone tell me how to do it and tell me where a schematic could be found.

Supply line won't stop running. Main water supply off [ 3 Answers ]

I was doing some bathroom remodeling and attempted to remove an old supply valve. It would not budge so I decided to cut the copper tubing underneath it and put on a new shutoff valve with a compression fitting. The problem is that water just kept coming out of that supply line. The main water...

3 phase supply Vs 1Phase Supply [ 1 Answers ]

I wanted to know difference between 3 phase and 1 phase conceptually

Changed out radiator w/copper supply baseboard w/ pex supply [ 2 Answers ]

And there is no heat in eminating from this baseboard. This was done in one room only and off the original radiator line.the system is all hotwater radiator w/the exception of this one room. We did not change the original heating supply line to this but added valves and then the pex. Seems the hot...

View more questions Search