Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to cut slot in 3mm aluminium?
[ 1 Answers ]
Hi, I am wanting to make up a frame, with 25mm T section x 3mm thick, aluminium, top and bottom, separated by 25mm SHS x 3mm crossmembers. The tops of the Ts have to face out. So I need to cut 3mm slots in the end of the SHS to accept the uprights of the T sections. Ideally these have square...
Aluminium extraction/reaction
[ 2 Answers ]
In the Hall-Héroult process I know the anode is carbon but what is the cathode made from? Also what are the by-products of the bayer process and the Hall-Héroult process
Aluminium wiring for DIY - If possible
[ 2 Answers ]
I've got an early 70s bilevel that, to my dismay, seems to have aluminum wiring. I've read all of the stuff online about the various fixes (copalum, ideal nuts, alumiconn, etc), and am wondering if any of these are really possible DIY solutions? From what I can tell, copalum is the most...
Why is iron attracted to magnets
[ 2 Answers ]
Why is iron attracted to magnets? Please help me running out of time!:confused: View more questions Search
|