 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How a plumbing p trap leaks
I installed a new drain for a shower, moving the drain to the middle of the floor, glued everything, ran a test of water through the drain and noticed there was water under the old black p- trap in the floor wall. Dried everything and tried again, same result.
Can black pipe p-traps corrode and or is there something else to consider? |
||||
Check out some similar questions!
When I flush the toilet water leaks down to the 1st floor. Is this a problem with the flange or what? And how do I repair it.
What is a S -trap?
Hello! I have an Armstrong Ultra SX 90 furnace with a chronic problem. The condensate "Y" trap (or Flue Trap) leaks at seams. The trap is made of two pieces joined together with some glue but leaks at the seam of the two pieces. I have replaced this part three times (and its $90/piece plus...
We are in the process of replacing a bath tub, we pulled it out and noticed a piece of plastic pipe sticking out of the hole in the floor. It was sort of laying over. When we moved it, it just pulled up and it wasn't connected to anything. There was tons of dirt in the hole in the cement. How...
I installed two sinks where I previously had one. I piped them both through their own p-trap and then into a T joint and into the wall. I have a leak on both drains here the p-trap comes up and connects to the pipe that goes to the T-Joint. The piece that is leaking has a flange molded into the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
