After I removed the old toilet and cleaned remaining wax and debris, I installed new

Check out some similar questions!

Installing a new toilet and can't get wax ring to seal [ 10 Answers ]

I have a tiled basement bath with the closet flange sitting on top of the tile. When I set the toilet and tighten the toilet bolts part way the seal is OK. If I tighten the bolts and draw the toilet to the floor it leaks. The under side of the toilet only allows about a 1/2" of room for the...

Toilet wax ring [ 4 Answers ]

Hey guys, I am rwady to install the toilet. My question is as follows... I went to Home depot and the guy gave me a wax ring with an ABS collar on it. He says that is what I need since my flange is ABS. Is it okay to use this style or should I be using just the rgular standard wax ring....

Reinstalled toilet will not clear debris [ 9 Answers ]

I recently re-tiled my bathroom floor and subsequently attempted to reinstall the toilet. Upon flushing, the tank will empty, the bowl will fill, the siphon jet appears to be operational, yet the bowl will not empty the solids at all. Prior to removing the toilet, there was no problem. ...

Toilet drain has fallen wax from toilet base [ 3 Answers ]

I did not put the wax ring properly at base of the toilet and some of the wax fell in the toilet drain.now the toilet won't flush.I tried to run a snack in the drain but it is not catching on the snack. What can I use to remove or dissolve the wax.please help. THIS TOILET IN THE BASEMENT AND IT...

Toilet wax seal [ 10 Answers ]

From what I've been reading, I'm guessing my new toilet is not sitting on the wax seal correctly. You have to hold the handle down to let it flush all the way and there is a Very faint but bad oder that smells like a foul oder being covered up with air freshener. This started happening after a...

View more questions Search

Check out some similar questions!

Add your answer here.