Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to calculate the short time current rating for current transformer?
[ 4 Answers ]
Respected sir's, Please clear my doubts? How to calculate the "short time current rating"(i.e-primary short time current rating-like if u take 400-400/5-15va/class1,40ka/3sec). 40ka/3sec-how to calculate this rating from the substation? Is there any formula?please advise me... ...
The Petry Company has $1,312,500 in current assets and $525,000 in current liabilitie
[ 7 Answers ]
The Petry Company has $1,312,500 in current assets and $525,000 in current liabilities. Its initial inventory level is $375,000, and it will raise funds as additional notes payable and use them to increase inventory. HOW MUCH CAN PETRY'S SHORT-TERM DEBT (NOTES PAYABLE) INCREASE WITHOUT PUSHING ITS...
Current for power supply
[ 2 Answers ]
Hi there, I need to purchase a new power supply for the transmitter of an in-ear monitoring system. The unit says it requires a 12V AC adapter supplying 250mA, however all I can find to buy on the internet are 12V AC adapters supplying 500mA. Is it bad to exceed the current? I remember...
Supply line won't stop running. Main water supply off
[ 3 Answers ]
I was doing some bathroom remodeling and attempted to remove an old supply valve. It would not budge so I decided to cut the copper tubing underneath it and put on a new shutoff valve with a compression fitting. The problem is that water just kept coming out of that supply line. The main water...
Changed out radiator w/copper supply baseboard w/ pex supply
[ 2 Answers ]
And there is no heat in eminating from this baseboard. This was done in one room only and off the original radiator line.the system is all hotwater radiator w/the exception of this one room. We did not change the original heating supply line to this but added valves and then the pex. Seems the hot... View more questions Search
|