Ask Experts Questions for FREE Help !
Ask
    monterrey82's Avatar
    monterrey82 Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Feb 20, 2010, 04:57 PM
    How can I connect a termostat FocusPro 5000 honeywell?
    I want to connect a termostat FocusPro 5000 honeywell, but I don't have the details, could you help me with this?
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Feb 20, 2010, 05:07 PM

    Have you tried looking here?

    Ref:

    http://yourhome.honeywell.com/home/A...ersManual.aspx
    monterrey82's Avatar
    monterrey82 Posts: 6, Reputation: 1
    New Member
    		  
    #3

    Feb 24, 2010, 11:41 AM
    Yes, it's just I have the manual, but I don't know how can I connect the termostat
    monterrey82's Avatar
    monterrey82 Posts: 6, Reputation: 1
    New Member
    		  
    #4

    Feb 24, 2010, 11:41 AM
    Yes, it's just I have the manual, but I don't know how can I connect the termostat
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #5

    Feb 24, 2010, 03:32 PM

    First what terminals and wire colors are used on your EXISTING thermostat?
    monterrey82's Avatar
    monterrey82 Posts: 6, Reputation: 1
    New Member
    		  
    #6

    Feb 24, 2010, 07:37 PM

    I have the following information in my thermostat

    TERMINALS COLORS

    RC RED
    R YELLOW
    Y GREEN
    C BLUE
    O/B W WHITE
    G ORANGE
    BROWN
    BLACK

    Could you help me with this please?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #7

    Feb 24, 2010, 08:21 PM

    OK, the install manual is here: http://www.alpinehomeair.com/related...structions.pdf

    What's the Focus Pro TH5?? Number that you actually have. 5000 is the series.

    I also need to know if you have a heat pump or a gas furnace.
    With a heat pump the outside unit runs in heat mode.
    monterrey82's Avatar
    monterrey82 Posts: 6, Reputation: 1
    New Member
    		  
    #8

    Feb 26, 2010, 07:20 PM
    I actually have heat pump and the terminals number is TH5110SD
    monterrey82's Avatar
    monterrey82 Posts: 6, Reputation: 1
    New Member
    		  
    #9

    Feb 26, 2010, 07:21 PM

    And I also want to know where can I connect the changeover valve? Which terminal is?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #10

    Feb 27, 2010, 05:13 AM

    I have been assuming that post #6 is your old thermostat. Of so, then the wires transfer directly. The jumper from R to Rc should be removed in your case. You don't appear to have aux/ backup/emergency heat

    O/B is the changeover valve. If the system heats in the cool mode and cools in the heat mode, then change parameter 2 of the thermostat.

    Are you comfortable with the setup options?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connect Honeywell Thermostat in place of old Lennox [ 2 Answers ]

I have a Lennox thermostat 67K4801 with numbers > and 3AAT89B38G1. > (Y1 G. O. R. L. T. C. W1. E.) I just purchased a Honeywell Programmabel to replace the old Lennox. The wiring instruction booklet shows all alternate wiring combination, except how to connect the T terminal. Please help! ...

Honeywell FocusPRO 6000 Install (TH6110D1005) - Replacing unknown model: pic included [ 9 Answers ]

I had no idea there were so many different types of thermostat configurations. So without fully understanding that, I purchased a Honeywell FocusPRO 6000 (based on ratings) to replace my current thermostat. The problem with the current thermostat is that I have no idea what the brand is. The label...

How to connect the cable to the honeywell thermostat:confused [ 2 Answers ]

How to connect the cable to the honeywell thermostat:confused:

I have a o,why,black,are,w,g wires how do I connect to honeywell [ 2 Answers ]

I have a orange, yellow, black, red, green, white wires coming from the wall. How do I fix the wiring to install the honeywell rth110b

How do I connect wires from Janitrol to the Honeywell Thermostat [ 1 Answers ]

How do I connect the wires from a Janitrol to the Honeywell RTH7500 Thermostat. I have the following wires: R Red Y Yellow G Green O Orange W2 White E Beige/Pink C Blue Black wire not connected

View more questions Search