 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman Furnace
Have a problem, when power is on the draft motor and blower come on and stay on and get 4 blinks on the board, bad limit, check the limits they are all good, ohm them. Also I jump past them to see and I still get the 4 blinks and the fan and inducer start up even with the t stat off and even with the wires to t-stat removed.
|
||||
Check out some similar questions!
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Good man furn blinks 6 times No power at therm Blower runs
My furnace is pulsating, gas valve is clicking on and off rappidaly, I shut it off for a short time then it will work for a few hours then start acting up again installed new air pressure switch no change,do you think I should replace the flame sensor.
I have a two year old high efficiency Goodman furnace that seems to have problems from time to time. The strange thing is that my son-in-law had his furnace installed about the same time and he has the same problem. We have our thermostat programmed for 62 during the night and at 6:00 am it goes...
I am replacing my 28 year old furnace with a Goodman furnace and an AC unit. Never had central air before. I have read conflicting reports on the quality of the Goodman line and wondering if I am making the right purchase. I am getting a 95% efficient, 90,000 BTU, 2 stage heating with a variable...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
