Ask Experts Questions for FREE Help !
Ask
    sahaya diaz's Avatar
    sahaya diaz Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Feb 16, 2010, 05:50 AM
    You don't have the proper privilege level to change the system time
    When I double click on the date&time toolbar it is showing "you don't have the proper level privillage to change the time. Have any solution for this?
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
    		  
    #2

    Feb 16, 2010, 05:52 AM
    Log in with an Admin account.
    sahaya diaz's Avatar
    sahaya diaz Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Feb 16, 2010, 05:53 AM

    When I double click on the time on right coner of the toolbar in windowsxp it showing "you don't hve the proper level privillage to change the time" Do have any solution for this?
    sahaya diaz's Avatar
    sahaya diaz Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Feb 16, 2010, 05:54 AM
    Quote Originally Posted by sahaya diaz View Post
    when I double click on the time on right coner of the toolbar in windowsxp it showing "you don't hve the proper level privillage to change the time" Do have any solution for this?
    It is opening in admin mode
    sahaya diaz's Avatar
    sahaya diaz Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Feb 16, 2010, 05:56 AM

    It is opning in admin mode
    NeedKarma's Avatar
    NeedKarma Posts: 10,635, Reputation: 1706
    Uber Member
    		  
    #6

    Feb 16, 2010, 05:57 AM
    Is this a home computer or your computer at work?
    theraam4u's Avatar
    theraam4u Posts: 2, Reputation: 1
    New Member
    		  
    #7

    Mar 11, 2011, 04:33 AM
    Your details not necessary.
    If it is a client system of domain,then only admin as right.
    "YOU CAN LOGIN AS LOCAL ADMINISTRATOR OF THIS COMPUTER AND CHANGE TIME"
    OR
    Type in command prmpt "net stop w32time" and then "net start w32time" to correct your time
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

You do not have the proper privilege level to change the system time [ 9 Answers ]

Hello friends I'm new here and this is my first question. Can anybuddy help me solving this When I double click on system time (system tray) the popup comes "You do not have the proper privilege level to change the system time" Is it some trajOn ? I've checked authentication level...

You do not have proper privilege level to change the system time [ 3 Answers ]

You do not have proper privilege level to change the system time

Proper way to jack/level up my house [ 1 Answers ]

My house is just about 100yrs old, it has solid wood posts for support under the main floor beam in the basement. Over time the house has settled and become quite unlevel. I have purchased the asjustable jacks to help raise the house up a little bit and to provide support under the side entrance...

Vinyl pool - proper water level at closing? [ 4 Answers ]

I have a 24,000 gallon in ground vinyl pool - Baltimore MD - usually the water level is about 1' below skimmers, but I drained more this year - almost 2-2.5 ft below the skimmers. Is this a problem - should I partially refill it? Besides blowing out the lines, what else would you recommend? ...

Proper way to get water level back to normal in comode? [ 4 Answers ]

Greetings. I had to replace the flush lever and few other small internal parts of our comode. The water level is well below normal and I cannot get it right! Help! I am afraid that with the minimal amount of water being used (not a high pressure comode) I will end up with a horrible back-up....

View more questions Search