 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
HAMPTONBAY 724491 track light parts
The light units come with a wire spring bent in a near circle. It fits in a groove in the housing to keep the Halogen bulb in place. I b oughjt $400 worth of these track lights but find there are not enough of these wire springs for holding all the bulbs in place. I Want to buy additional springs to replace thel ost ones.
[email protected] |
||||
Check out some similar questions!
HI I've now purchased 2 Ikea radium flexible track lights for installation in my kitchen and neither has worked for longer than a few seconds. As I assumed that the first one was a bad transformer and no longer had the receipt etc, we drove down to Ikea and bought another set. If you know this set...
I purchased a Hampton Bay Single-Light Track Light (256-759) to be use for my wife's statuettes in a lower bookcase. The light works great but unfortunately, the translucent glass shield around the bulb gives out too much light through the glass and is very distracting when looking at the...
How can I shorten the length of the light cord on a Hampton Bay track system ? There is a tube that plugs into the track that has a serries of screws but there is also a screw at the light base also.
We bought this fan from Home Depot, and all three light bulbs hve gone out. We now need 3 replacements bulbs. The base (part that you crew into the socket) is smaller than a normal bulb and we can't seem to find them. Can you help me? Thanks!
I have three tracks, and each track has three lights. Two little holes burned through the wall of the base of the lamp head! The bulb stopped working but it didn't blow a fuse, which is very scary. Any idea what caused that? If I don't find out I am ready to remove all of them convinced that it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
