Ask Experts Questions for FREE Help !
Ask
    tugger22's Avatar
    tugger22 Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 15, 2010, 07:09 AM
    I have a 14.5 b&s Sears lawn tractor it starts easy and runs fine until I engage the
    I have a 14.5hp B&S powered SEAR LAWN TRACTOR, it starts easy and runs fine until
    I engage the mower deck :ie UNDER LOAD, within a minute or two it starts smoking very
    Badly.
    Upon inspection I find OIL in the Air filter plenum, if I wipe it dry and restart, it repeats.
    Is this caused by leaking valves, worn rings,or some engine adjustment.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Feb 15, 2010, 07:13 AM

    Hi,
    Could be a bad breather. Something is pressurizing the crankcase above normal. First I think I would check for a blown head gasket, one leaking into the crankcase but not into the atmosphere.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Lawn Tractor Mower Won't Engage [ 5 Answers ]

I have a 18.5 HP Craftsman Lawn Tractor, model # 917.274811. It starts fine but the mower won't engage. The attachment clutch lever seems to have the same tension, and the drive belt seems fine. I've looked and can't see any obstructions. Any ideas?

Troy Bilt lawn tractor-starter won't engage [ 1 Answers ]

I mowed the yard w/out problem 2 days ago. Today I went to start the Lawn tractor and the motor won't turn over. I have never had problems with it before. Do you have any ideas on what I should check? Troy Bilt Super Broncho 42" deck Kohler 19hp/597cc

Murray Lawn Tractor will not engage the trans [ 1 Answers ]

iI have a Murray lawn tractor that will not endage the transmission. When I release the lever from the push mode to the drive mode it's still in the push mode. It's a model 425620X92A. CC

Lawn tractor will not engage engine [ 1 Answers ]

The plastic gear on top of what I guess is the starter on model no.917-257631(craftsman 42') is worn down and Icannot find the part or part no. anywhere


View more questions Search