Ask Experts Questions for FREE Help !
Ask
    tim center's Avatar
    tim center Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 25, 2007, 04:32 PM
    Lawn tractor will not engage engine
    The plastic gear on top of what I guess is the starter on model no.917-257631(craftsman 42') is worn down and Icannot find the part or part no. anywhere
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
    		  
    #2

    Mar 25, 2007, 05:37 PM
    Hope this helps,
    https://www.askmehelpdesk.com/lawn-ga...age-67143.html

    Don
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawn tractor engine won't start [ 18 Answers ]

I've already swapped out the solenoid. No luck. Battery is good. I "think" I checked all the ground connections and safety switches. Problem is when the key is turned on the engine turns once... then slows to a stop... it may go over again.. but it won't go long or fast enough to start......

Lawn tractor dies [ 2 Answers ]

My Poulan Pro riding lawn tractor starts easily. If I try to release the clutch after I put it in gear, it dies. If I try to engage the blades, it dies. What could cause this?

Engine starts, won't engage [ 3 Answers ]

I have a 16.5 hp Craftsman Lawn Tractor (2001) Worked fine one day. Next day started fine, engaged and ran about five feet, jerked a few times. I shut off, checked it out. It started right up again, but would not engage. No motion forward or reverse. Sears tech support suggested parking brake...

Tractor lawn mower [ 2 Answers ]

Hi I have a Wizard lawn mower with a Briggs & Stratton engine that was ran with low oil I don't know much about engines but when I stripped it the piston arm has sheared at the end I can't see any other damage so my problem is I need to replace the piston but I can't see any no on the piston all I...

View more questions Search