 |
|
|
 |
New Member
|
|
Feb 13, 2010, 04:55 PM
|
|
1993 Astro Conversion Van Electronic Window
Hey there guys and gals! As the tile states, I have a '93" model Chevy Astro conversion van with window issues. Without thinking about the issue regarding the window ran out and bought a brand new motor and installed it. That was rough but fun in many ways. I was able to re-install everything with the new motor. Sad thing is the window still does not work. I'm fairly sure it's a short or issue with the wiring. But could use some pointers on what to look for? And what not to look for? The window will work once in a blue moon from the drivers side. Never did manage to get the window to work from the passenger side however. I have had the van for a little over a year now. Great little van for what i gave for it. Just need to get the issues it does have worked out. And have no clue about how to run down shorts in wiring harnesses. Thanks in advance for any and all advice or help you can provide!
|
|
 |
Uber Member
|
|
Feb 13, 2010, 05:29 PM
|
|
Check all under hood and under dash fuses with a test light or multimeter:
https://www.askmehelpdesk.com/cars-t...tml#post252145
Start testing for power, along the circuit, with a test light or multimeter. Check continuity on switches.
|
|
 |
New Member
|
|
Feb 14, 2010, 10:45 AM
|
|
I would very much like to rate your answer TxGreaseMonkey. However I'm new to the site and do not see any area or link that says Rate This Answer ? Please explain further? Thank you!
|
|
 |
Uber Member
|
|
Feb 14, 2010, 02:27 PM
|
|
Until you have been a member for 48 hours and have at least 5 postings, I believe, the "Rate this Answer!" box does not appear. Post your thoughts, anyway.
|
|
 |
Uber Member
|
|
Feb 14, 2010, 05:48 PM
|
|
For the passenger side to work, make sure the "Window lock" control is off.
|
|
 |
New Member
|
|
Feb 15, 2010, 08:21 PM
|
|
 Originally Posted by KeepItSimpleStupid
For the passenger side to work, make sure the "Window lock" control is off.
My Make and Model of van does not have a "lock" switch. Just a plain jane electronic switch for up and down. Thanks for the idea however. I did manage to get it to work for about 30 minutes a few weeks back. Don't have a lot of time to tinker with it through the week. Why I am positive it is a short in the wiring. Will be going through the various suggestions and trying to fix this problem as soon as possible! Thanks you guys your thoughts and ideas! Very much apperciated!
|
|
 |
Uber Member
|
|
Feb 16, 2010, 02:53 AM
|
|
The Window lock switch is on the drivers side. It prevents all windows but the driver's side from working. It's part of child safety.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
1996 astro van
[ 1 Answers ]
Hi I have a 1996 chevy astro van, while I'm driving for a while van just dies out, check fuel pressure is good 55 psi, I checked the ECU is good, I checked the EGR valve is good replace distributor cap and rotor is good replace the Ingition moduled, check the crank sensor is good. When I go back...
1991 chevy astro van oil leak
[ 1 Answers ]
Hello my name is javier and I have a 1991 chevy astro van that has a transmission leak
How can I fix it myself
1999 Astro van - fans
[ 6 Answers ]
My son told me he saw the temp gauge was up to the redline one day. I was looking into reason why, such as possible defective water pump or thermostat. Some one mentioned it could be the fan. Apparently there are two fans in the Astro, one for the radiator and not sure where the other fan is...
1986 Astro Van died on highway
[ 3 Answers ]
I filled my 1986 Astro Van up with gas, drove for about two hours when it just died. I pulled over to the side of the highway, tried restarting it and nothing. I had a person try and boost it, nothing, was told maybe vapor lock, so I open the gas tank, still nothing. Fuel pump is working. So what...
Clutch Fan removal on 1999 Astro VAn
[ 1 Answers ]
Can anybody tell me if you turn the big nut clockwise or counter clockwise to remove the fan and clutch assembly from the water pump pulley shaft. Also any hits or tips on how to break this nut loose would be helpful.It is on there really tight and was wondering if it is a left hand thread. Have...
View more questions
Search
|