Ask Experts Questions for FREE Help !
Ask
    GordonCurtis's Avatar
    GordonCurtis Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 10, 2010, 06:23 AM
    How to replace toro 724 pull cord recoil
    I replaced the pull cord on a Toro 724 snowthrower and screwed the recoil assembly back on to engine several times but cannot get it to recoil. I tried putting assembly back on with the two "keys" extended and inserted back into unit. No luck

    Thanks, Gordon
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Feb 10, 2010, 08:42 AM

    Hi,
    Did you pretension the unit prior to putting in the rope? This involves winding it under tension to the point where it stops and backing off one full turn (could be more, but it needs to be at least one) and then putting in the rope.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toro Lawnmower Pull Cord [ 4 Answers ]

How do I replace my pull cord on my Toro Recycler Lawn Mower. It appears to have rivets holding it down. Do I really need to unscrew the entire enginge?

How to Fix a Pull Cord on a Toro Recycler Mower? [ 2 Answers ]

My pull cord on my Toro Recycler mower broke. How do I fix it? :confused:

Pull cord on chainsaw won't recoil [ 3 Answers ]

I was reinstalling the pull cord on the chainsaw because it broke.. when putting the pull chain and assembly back on the saw the cord will not recoil back when pulling it out. I see there is a coil underneath the assembly but how do you reset it so that it works right? Advise - thanks - Phil

Edger pull cord will not recoil [ 1 Answers ]

I have small gas edger that the cord will not retract back inside. I would like to try and fix it myself, but I have no experience with this sort of thing. So I need some simple steps to possibly get it repaired, hoping maybe I need to just rewind it.. I one that like to see how things are made...

View more questions Search