 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Carrier furnace with 4 LED control board 3 amp fuse opens after burner and circulation fan has been on for awhile 26Vac pulls down to 8 volts ac Replaced with 5 amp fuse and it does not open and furnace operation seams normal. Valve control is a White Rodgers 36E What should the resistance of...
I went to finally turn on the heat for the first time and while it took a minute or 2 for the vent motor and burners to ignite, the main fan never started up. The fan does work with the AC, but does not work when I switch the fan to "on" at the thermostat. Could it be the integrated Furnace...
Hello, I have a Miller oil furnace Model MSBA-066ABFO-05 that fires up and then shuts down because the fan takes to long to turn on. When this happens the reset trips on the controlor. The fan comes on shortly after the limit trips. When the fan is running if I push the reset the burner fires...
Furnace burner doesn't always come on, so I manually turn the thermostat off/ also turn the temperature setting down, when the furnace shuts off I turn the turn the thermostat back to on/ also turn the temperature setting to the desired room temperature, and then the furnace will usually work...
Greetings,I have a tempstar furnace model ntc6075fba1,s/n l984128725, the pilot lights, then the blower comes on but the burner does not come on, then when the thermostat is turned down the blower continues to run.please inform me of the problem.Thank you, Albert.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
