Ask Experts Questions for FREE Help !
Ask
    nomadness's Avatar
    nomadness Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 8, 2010, 07:53 AM
    Maytag pressure valve
    My matag top load coin op washer is slow to fill, almost takes 30 min. I have checked the screens to clean debris from the line. After the cycles have finished if I don't turn off the valves to the hot and cold water seeps into the tub and either soaks the clothes I forgot to put in the dryer or just sstarts slowly filling up the empty tub. Recently I have noticed water on the floor, I assume is coming from the same area.

Check out some similar questions!

Can I solder outlet side of a ball valve if the valve is closed and under pressure? [ 0 Answers ]

Can I solder outlet side of a ball valve if the valve is closed and under pressure?

Pressure valve [ 1 Answers ]

My pressure valve is leaking I need to purchase model 50 650kpa pressure valve for are sola hot water system but I am having trouble buying are pressure valve which has are very fine thread on the bottom of valve I have been to pumbing places and they want me to buy the whole system which will...

Maytag Washer Water Inlet Valve [ 1 Answers ]

I suspect that the water inlet valve on my Maytag top loading washing machine should be replaced. The machine will not dispense hot water. Cold water only is dispensed when the warm or cold wash setting is selected. However, no water is dispensed when the hot wash setting is selected. Before...

Water Pressure Valve and Ball Valve [ 1 Answers ]

My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.