Ask Experts Questions for FREE Help !
Ask
    chaschamp's Avatar
    chaschamp Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2010, 08:24 AM
    Can I solder outlet side of a ball valve if the valve is closed and under pressure?
    Can I solder outlet side of a ball valve if the valve is closed and under pressure?

Check out some similar questions!

Can you solder a closed valve with pressure on the other side? [ 2 Answers ]

Can you solder a closed valve with pressure on the other side?

Pressure relief valve stuck closed [ 0 Answers ]

Hi there, I have a Luxaire furnace with Rogers White model 50A50-241. Once in awhile the bottom panel of the furnace will pop forward and the safety switch will shut the furnace off. Normally I push it back on and it resets no problem. This time the pressure relief valve is stuck closed. I had a...

Can I plug outlet of dripping water pressure relief valve [ 1 Answers ]

The Wilkins water pressure relief valve at the inlet to the house supply is dripping. Can I safely plug the outlet where the drips are flowing, until I replace the entire valve? Is the valve strong enough to hold pressure once it is plugged?

Water Pressure Valve and Ball Valve [ 1 Answers ]

My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.