Ask Experts Questions for FREE Help !
Ask
    runsrivermaples's Avatar
    runsrivermaples Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 4, 2010, 01:10 PM
    Why does my jet pump keep running?
    Today I thawed out my water line connected to my myers jet pump. I opened my spigets in the house and now have water. The problem is, the pressure gauge reads 60 psi. and continues to climb. Normally it shuts off at I believe 30 psi. I shut off the pump fearing something bad could happen if the gauge continues to rise. How can I trouble shoot this problem? Thank you.

    -charlie N.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #2

    Feb 4, 2010, 04:53 PM

    Is it possible that the little pipe leading to the switch is still frozen?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to prime a jet-pump [ 3 Answers ]

How do you prime a jet-pump

How can I make my well jet pump to stop running? [ 19 Answers ]

I just install a new CWS100: CWS100 - 1 HP CAST IRON CONVERTIBLE WELL JET PUMPS and Flotec 35 Gallon Capacity Pre-Charged Pressure Tank, Vertical, With 82 Gallon Equivalent . I have install both of them and some how the pump will not stop running even the water is not in use. The gauge will show 29...

Jet pump [ 4 Answers ]

Pump continues to run replaced pressure switch didn't help check pressure coming from pump could only get 20lbs which seems extremely low also check pressure going to switch it was also 20lbs does this tell me that the pump is worn out, are what.please help need water the pump is a water ace 1/2 hp...

Jet pump [ 2 Answers ]

I have an old jet pump and would like to install it so I can pump water out of the lake for my sprinkler system. I have the pump and a small tank. How do I make this work? Thanks in advance.

Jet Pump [ 5 Answers ]

We have a jet pump in our basement.The jet pump is running steady.The tank is not filling up.There is lots of water in the line and the pressure is great.Why do we have no water in the tapes?


View more questions Search