 |
|
|
 |
New Member
|
|
Feb 3, 2010, 05:40 PM
|
|
Add light kit to ceiling fan
I am trying to add a light kit to an existing ceiling fan. I connected the two wires from the light fixture (black and white) to the two wires in the fan "for light fixture" (blue and white) White to white and black to blue. I then turned wall switch on, and no light... I tried pulling the chain, changing the bulb, even trying it on another fan in another room. This seems like a simple project, but I am stumped...
|
|
 |
Full Member
|
|
Feb 3, 2010, 05:51 PM
|
|
The wires from the ceiling fan to the fixture in the ceiling has to have the blue wire connected there also to the black before the light can work.
Blue and black wire from ceiling fan to black in ceiling and white to white.
|
|
 |
Uber Member
|
|
Feb 3, 2010, 08:07 PM
|
|
|
|
 |
New Member
|
|
Feb 4, 2010, 06:25 AM
|
|
There is a black, white, and tan wire wire-nutted together coming down from the ceiling... are these the wires you are talking about? The rest of the wires are in the plastic plug that plugs into the control portion below...
|
|
 |
Full Member
|
|
Feb 4, 2010, 10:14 AM
|
|
From the top of the ceiling fan there should be white,blue and black wires. If you already have the ceiling fan installed then the black wire should be connected to the black from the attic and the white to the white from the attic. Just find the loose blue wire in the top of the fan and remove the wire nut connecting the 2 blacks together and attach it also.
Fast forward on this video to the wiring of the fan:
http://www.youtube.com/watch?v=coDff5RLIas
|
|
 |
Uber Member
|
|
Feb 4, 2010, 03:18 PM
|
|
What wires come from the fan? What colors are they?
|
|
 |
New Member
|
|
Feb 4, 2010, 05:07 PM
|
|
OK--7 wires coming through the "bottom"of the fan--5 go in to plastic plug that you plug into the "control" portion of the fan(gray, blue, orange, and, black, blue. The other 2 are white and black. They are wire-nutted together with a brown jumper wire coming out of the plastic plug.
|
|
 |
Full Member
|
|
Feb 4, 2010, 06:03 PM
|
|
You shouldn't have to mess with any plugs from the bottom part of the ceiling fan. The light should just plug into that. You need power to that from up above!
I bought ceiling fans over 20 years ago andf all I did was connect the blue and black wire from the fan to the ceiling and the white to the white and ground to ground. Way before they had plugs for the light kit you would just connect the same colored wires with wire nuts.
|
|
 |
Uber Member
|
|
Feb 4, 2010, 10:24 PM
|
|
Joed, are you talking about in the canopy at the ceiling? There are plugs up there? Is this a remote fan?
|
|
 |
New Member
|
|
Feb 5, 2010, 04:55 PM
|
|
No, not at the ceiling. When I took the switch cup cover off, there were two wires that said "for light install", which were a blue and white. The directions with the light kit said to connect the light wires (white and black) to the corresponding white and black(or blue in my case). The only other wires which were loose were an extra white wire, and black wire coming down from the bottom of the fan, and a brown jumper wire coming from the plug... these three wires were wire-nutted together when I first opened the fan up. Just a plastic plug which connects the fan to the switch cup cover. I do not think it is a remote fan.
|
|
 |
Full Member
|
|
Feb 6, 2010, 04:55 AM
|
|
Here is another video:
http://www.ehow.com/video_2329523_wiring-kit-ceiling-fan-installation.html?pid=1&cp=1
|
|
 |
New Member
|
|
Feb 6, 2010, 07:14 AM
|
|
Patty, this is the way I tried to wire the light kit initially... the same way the directions with the light kit say---but to no avail. That seems like the correct and easy way, but it is not working with my application. I have 2 fans and two different light kits I am trying, but still canīt make it work...
|
|
 |
Full Member
|
|
Feb 6, 2010, 04:27 PM
|
|
 Originally Posted by joed2002
Patty, this is the way I tried to wire the light kit initially...the same way the directions with the light kit say---but to no avail. That seems like the correct and easy way, but it is not working with my application. I have 2 fans and two different light kits I am trying, but still canīt make it work...
Can you post some pictures of what's coming out of the ceiling and what's going into the fan? Then post bottom of fan,canopy and light kit.
|
|
 |
New Member
|
|
Feb 6, 2010, 05:03 PM
|
|
|
|
 |
Full Member
|
|
Feb 6, 2010, 05:33 PM
|
|
I would disconnect the blue wire from the red wire in the ceiling and attach it to the black wire coming from the ceiling. Any othe suggestions out there? Where are you ceilingfanrepair man?
|
|
 |
New Member
|
|
Feb 6, 2010, 06:33 PM
|
|
Ok--I attached the upper blue wire to the two blacks, and voilā, we have light!! Yay! Thanks for your help Patty and ceilling fan repair "person". I will let you know how the other install goes tomorrow!
|
|
 |
Full Member
|
|
Feb 6, 2010, 06:38 PM
|
|
I am sooooo glad you got it working! I started to doubt myself and my abilities that's why I asked for help!
I'm glad we figured this one out. The picture really helped out a lot!
|
|
 |
Uber Member
|
|
Feb 10, 2010, 12:25 AM
|
|
I am guessing the red wire is controlled by a different switch, and you probably could have gotten light with the red wire if you'd tried every switch.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Adding a light kit to ceiling fan w/ light & dimmer switch
[ 6 Answers ]
I would like to add a light kit to a ceiling fan(cannot find a name on it) that is currently hooked and working up in our family room - since we moved in 6 years ago (house was built in 1991).
I would like this to operate like our bedroom ceiling fan (which already has a light attached) and...
Ceiling Fan Light Kit
[ 2 Answers ]
I installed a ceiling fan light kit, It has a white and a black wire. I hooked up the white to the white on the fan. I then hook up the black wire to the blue wire on the fan. Nothing happened except the fan worked.
I then unhook the fan from the celing and hooked up the red, black, and blue...
Ceiling fan with light kit on separate switches
[ 1 Answers ]
I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...
Light kit for ceiling fan
[ 1 Answers ]
I just purchased a Harbor Breeze 52in. Helix II Ceiling fan. The light kit came with the fan. There are 5 G9 blubes that came with the light kit. My problem is that the fan works properly but the lights will not come on.
The instructions say to "connect the black wire plug from the fan to the...
View more questions
Search
|