 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We have a 20 year old Bryant electiic furnace and the blower and the heat will not shut off unless you trip the three brackers on the furnace. The fan relay has been replaced and a new thermistate installed but did't fix it. The thermastate has no effect . With it turner off the heat anr fan still...
Hello. I have a Bryant plus 90 furnace. Approx 8 years old. It will run for about 5 minutes then stop before reaching desired temp. Then it will try to start up again but shut down before ignition. Flipping power on and off will make it work again. I cleaned the flame sensor with no change. It...
On that furnace that only heats to 62.when the temperature reaches 62 the furnace shuts down but the fan remains on and it cycles again it ignites again but only till 62-63 degrees and cycles over again
I have nine years old 80 BTU furnace.when I turn it on it start and shut down.if I open furnace door and start it works well.what is the problem?
I have a 2007 Bryant Plus 90t Furnace and since it was installed 1n 2007 the Flame Sensor had to be cleaned 3 times, what's the problem why does the flam sensor get corroded and the furnace won't light.
View more questions Search
|
