Ask Experts Questions for FREE Help !
Ask
    BIGBLOCK672's Avatar
    BIGBLOCK672 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 29, 2010, 11:01 AM
    Evap, emissions control system not ready
    We have an 328 I bmw that will not pass inspection because the evap emissions system is showing not ready
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jan 29, 2010, 11:09 AM

    If the repairs have been made and the code cleared:

    https://www.askmehelpdesk.com/cars-t...ml#post1801832
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

P1457 EVAP Emission Control System Leak Detected (Control Canister System) [ 5 Answers ]

How much it cost to repair this on a 98 Honda Accord? P1457 EVAP Emission Control System Leak Detected (Control Canister System)

Where is the BMW EVAP Emissions Control Valve Located [ 1 Answers ]

1998 BMW 328is M52 engine. 2.8L

Honda Civic CEL Evap Monitor Not Ready Yet [ 2 Answers ]

I have a 2002 Honda Civic EX with 136k on it. Just before I went to have it inspected the check engine light came on. I hooked up my code reader and P1259 - vtec system malfunction popped up. The car runs smooth so I reset the codes yesterday and all the monitors are back to normal except for...

Evaporative emissions control sensor [ 1 Answers ]

I have a 98 Cavalier & just replaced my plugs wires & air filter because the car was stalling. After doing this the problem continued so I purchased an OBD2 to test. I get the code P0452 which is Evaporative Emission Control System Pressure Sensor Low Input. What is this & how do I get it fixed?

View more questions Search