Ask Experts Questions for FREE Help !
Ask
    latch9's Avatar
    latch9 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 28, 2010, 09:16 AM
    Fpe replacement knobs baseboard
    Where can I buy replacement knobs for wall mounted thermostat for Federal Pacific electric baseboard heaters - knob spins and you can't tell when it is off.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jan 28, 2010, 01:51 PM
    Try a hardware store, or an appliance store, and look for a knob that will fit. If possible, may be better to change out the stats with new.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fpe 2P60 - 60 Amp circuit breaker size wire [ 1 Answers ]

FPE Class CTL panel. I need to switch to a 60 amp circuit breaker for heat strips. What size wire is required.

Replacing Shower Knobs [ 1 Answers ]

I am trying to replace some old shower knobs but can't get them off. I have unscrewed the screw and tried to pry them off but they won't budge. Do they not come off or are the just stuck because they are old. If they are stuck what can I use to get them unstuck?

2 knobs, 1 knob leaking & a baseboard. [ 1 Answers ]

I have 2 knobs linked to the baseboard in my bedroom. One of them is directed from a main boiler system; as I own a condo, we do not have individual setups. The first knob when turned on enables the second knob right next to it "looks like an outside spicket" leak a little water. The water...

Replacement knobs for American Standard shower [ 1 Answers ]

Where can I find replacement knobs for an old American Standard shower? There are two knobs, hot and cold.

Diverter and Shower Knobs [ 1 Answers ]

I had a diverter that wasn't pushing water through the shower head very efficiently. Since all of the knobs started dripping, my friend recommended that I pull all stems and replace at least the washers. So we pulled out the stems and replaced them. We had some trouble getting the knobs off the...

View more questions Search