Ask Experts Questions for FREE Help !
Ask
    sky king's Avatar
    sky king Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 25, 2010, 09:23 PM
    How do I fix a leak in a kohler kitchen spout?
    I have a 12 yr old Kohler kitchen faucet with separate handles and separate spout. The spout is leaking at the base only when either the hot or cold water is running or not. Do I have to unscrew the nut underneath the spout under the sink or can I remove it from the top? If I'm stuck with removing the nut, what kind of wrench should I use in such a confined space under there? Once I get it out, how do I fix the leak? I don't have the model number.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #2

    Jan 25, 2010, 10:41 PM

    Hello Sky,

    Open the links below I hope one of them is your faucet and it will show how to remove the spout and replace the seals, good luck.

    John


    http://www.plumbingpartsdepot.com/ko...s2hdlkitch.pdf

    http://www.plumbingpartsdepot.com/ko...r2hdlkitch.pdf

    http://www.plumbingpartsdepot.com/ko...d2hdlkitch.pdf

    http://www.plumbingpartsdepot.com/ko...l2hdlkitch.pdf
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Jan 26, 2010, 08:12 AM
    Quote Originally Posted by ;
    Do I have to unscrew the nut underneath the spout under the sink or can I remove it from the top? If I'm stuck with removing the nut, what kind of wrench should I use in such a confined space under there? Once I get it out, how do I fix the leak?
    Remove the handle. You will see a retaining nut,(see image) under the handle. Unscrew it and lift the spout up and out. Go to a plumbing store and purchase replacement "O" rings and a small tube of Silicon Jel. Replace the "O" rings and lube the "O" rings and the inside of the spout body with the Jel. Press the spout back on, tighten the retaining nut and replace the handle. Leak all gone now? Good luck, Tom
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trying to remove spout from body on kohler k-10412 [ 5 Answers ]

Hi I am trying to replace o rings and bearings from a kit kohler sent me for a leaking faucet. I have removed handle bonnet and valve no problem The instructions say "Hold the base of the spout and pull up to remove spout from body" when I try to do this it comes up approx 1/4" and then stops I...

How to fix a leaky kohler faucet? [ 2 Answers ]

I have a single handle kohler shower faucet that is leaking. I installed a new mixer cap kit,but it is still leaking. What else might cause this to leak, and how do I fix it?I flushed it as you recommended and it still leaks. I do not know the exact model #,but it is similar to the ...

Kitchen drain leak, new gasket didn't fix [ 1 Answers ]

Hi, we have a leak under our kitchen sink below the drain basket. The metal pipe from the drain connects to a plastic pipe with a compression joint using a plastic nut. The water is coming from the top of the nut at the metal pipe. We have replaced the gasket and the nut, and it still leaks. ...

Older Kohler leaking at base of Kitchen Spout. Got off but can't get apart [ 2 Answers ]

I've got a 15 year old Kohler 2 handle kitchen sink that's leaking around spout base. I took the spout off and there's a valve looking thing loose up in the handle. It appears that it once screwed into the base of the faucet assy (the water pressure has always been bad at this sink). It looks...


View more questions Search